|
Hahn
Racecraft GSXR-1000 Turbosystem!
Stage I GSXR-1000 Turbosystems are
the ultimate in bolt-on performance. Designed to be
installed on a stock engine, but with enough turbocharger airflow
to support 300 HP already included, Stage I systems also offer
room to grow should you decide you need more than Stage I
horsepower.
This
revolutionary turbosystem brings the type of performance that Hahn
RaceCraft EFI Turbosystems are famous for, but for thousands of
dollars less since the bike already is fuel-injection equipped.
We attacked the stock EFI with
our twelve years of motorcycle fuel injection experience and the
results are stunning, as the dyno chart shows. The HP is
certainly gratifying, but look at the torque: it's between 100 and
160 ft/lbs all the way from 6000 to 10,500 RPM! This broad,
useable powerband is simply unprecedented: this engine loves
boost! The rapid low speed response is a direct effect of
our turbocharger choice. Our Mitsubishi turbochargers, like
nothing else available, employ 21st century technology.
They are light years ahead of anything else in their rapid
response and big power, with the total package made quite sweet by
bulletproof durability.
If 250 HP is a bit much, that's
OK. The system can be adjusted to lower power levels easily.
On the other hand, if you thirst for even more, we are continuing
development of the support components that will allow you to use
the entire 300 HP the standard turbocharger is capable of.
What? Still not enough? Install our Shootout
turbocharger (a direct bolt-in replacement for the standard turbo
unit), our Programmable EFI system and aim for the sky!
Stage I systems are available
now! If you would like to be informed of new
developments as they occur, just email us and we will add you to
our mailing list.
SYSTEM FEATURES:
This is a complete TurboSystem, with nothing else to buy! *
- Entire system fits within
stock bodywork for a very "stealthy" look!
- Exhaust note is mellow and
quiet enough to avoid unwanted attention.
- Ultramodern Mitsubishi-Hahn
Super 15G turbocharger is the most advanced and durable unit
available, well proven during years of brutal, record-setting
performances. Capable of supporting up to 300 HP of
airflow, and even more with bolt-in turbo upgrades!
- Billet aluminum intake plenum
installs easily.
- Boost gauge (included) has
"peak hold" feature to record boost pressure data
for later viewing. Can be mounted in concealed area for
further "stealth".
- Ceramic-coated exhaust system
includes muffler, can be easily configured for a variety of
canister types, even dual exhaust.
- Air piping is powder coated
for long lasting beauty.
- Fuel system is easy to
install and calibrate; interfaces perfectly with factory EFI
system.
- All needed hardware is
included, along with detailed installation/tuning
instructions.
*Ignition
retard must be achieved through a Power Commander, available
separately.
*Some
products listed are legal for sale or use in CA only for
racing vehicles which may never be driven on a public highway.
|
